Manufacturer: ISOCAMP®
Thermal mats for pop-up roof SCA 212 - Vantourer 600 / 630 / 540
Extreme insulation against cold but also heat - noise-inhibiting
Custom-made magnetic thermal mats for the SCA 212 pop-up roof of the Vantourer 600 / 630 / 540
Different color combinations available:
beige/black, beige/silver, gray/black or gray/silver
- Insulation material - aluminum laminated with sewn-in magnets
- Material thickness: 8mm
- Attachment using magnetic adhesive strips (40 pieces included in delivery)
- Easy to assemble, initial assembly approx. 15 minutes.
- Insulation against cold & heat & noise
- To be attached from the inside
- Store folded or rolled
The high roof insulation consists of four parts, which are attached to the pop-up roof using magnets and connected with Velcro. The front part can be partially rolled down for ventilation or completely removed. Since every high roof can have a certain height deviation, the thermal mats are slightly larger at the bottom and are simply folded over to prevent cold bridges.
The enclosed metal pads serve to hold the thermal mats. These are glued every approx. 20cm to the rail at the top of the high roof.
Clean the aluminum rail with isopropanol or another grease-dissolving agent. Remove the protective film from the metal pad and attach it to the desired location. ATTENTION: The ambient temperature as well as the temperature of the aluminum rail and the metal pads must be at least 15 °C! No need to damage the roof by drilling, the pads can be removed without leaving any residue.
Material and production in Germany, changes and special requests are possible.
ISOCAMP - we fulfill every insulation request made to measure!
black outer fabric
8 - layer insulation material
Inner fabric: durable fabric
Filling 1: Thermo foil aluminum
Filling 2: 2mm thermal foiling
Filling 3: Thermo foil aluminum
Filling 4: 2mm thermal fleece
Filling 5: 100gr/sqm polyester padding
Filling 6: Thermo foil aluminum
Outer material: water-repellent black polyester fabric