frequently asked questions about our thermal insulation
Gerneral information
The delivery time is usually 10 to 20 working days, but can be up to 20 working days depending on the order situation. If you have special delivery requests, please contact us by email.
PayPal or bank transfer
The magnets are sewn into the hem of the insulation.
We currently offer 2 different fabrics for indoor use, gray and beige. The outer material can be chosen between silver or black.
The black outer material is more expensive to purchase and contains one more layer of aluminum.
Yes, this is not a problem.
Thanks to the thermal insulation, less moisture condenses. Ventilation and heating are still necessary.
Of course, this depends on the vehicle and heating behavior. We tested in Norway at minus 20 degrees. There was a 10 degree difference between heating upstairs and downstairs. So bottom 23 top 13. Without a heating hose going up, the temperature didn't go below zero.
The thermal material is not suitable for installing in front of heaters or on/around hot objects. It loses its shape and is flammable.
No, these are insulation for tents and camping vehicles.
Pop-up roofs
The thermal insulation is attached with magnets. The magnets are sewn into the hem of the insulation.
Small metal strips are glued to the places where the vehicle is not magnetic. These are included in the delivery.
When folding the roof, the thermal mat must be removed and can then remain laid flat in the high roof.
Window insulation
Yes, the draw is still lockable.
The thermal mat for the windshield is attached with small, inconspicuous metal pads. You will receive assembly instructions upon delivery.
Window "without cladding" - the bare body is visible.
- Here the thermal mats are attached directly to the body.
Window "with cladding" - the body is covered by plastic cladding.
- We supply metal pads which are glued to the plastic cladding. Our thermal mats then adhere to these metal pads.
insect protection
coarse mesh:
Weatherproof and rust-resistant and robust fiberglass with a mesh size of >1mm. The mesh holes have a size of 1.17 x 1.57 mm.
fine mesh:
Polyester with a mesh size of <1mm. The mesh holes have a size of only approx. 0.82 mm! The material is washable at 30°. Protects against Culex, mosquitoes, Anopheles (malaria), Aedes (dengue fever, yellow fever, Chicungunya), small insects such as sand flies of the Phlebotomidae family (leishmaniasis), midges (filariasis)
Pollen protection:
Pollen protection fabric with a mesh size of approx. 1.2x0.2 mm. The pollen protection fleece with a particularly fine structure effectively keeps up to 97% pollen and 100% insects away. The special fabric reduces allergic reactions such as itching, sneezing and swollen eyes.
The sewn-in magnets in the seam of the insect protection hold it directly to the body of the campervan.