Manufacturer: ISOCAMP®
Thermal mats for pop-up roof MS Components X 250 - Pössl 2 Win R Plus
Extreme insulation against cold but also heat - noise-dampening
Custom-made magnetic thermal mats for the MS Components X250 pop-up roof
Suitable for Pössl 2 Win R Plus
different color combinations selectable:
beige/silver or grey/silver
Material thickness: 8mm
Fastening with magnetic adhesive strips (40 pieces included in the delivery)
easy to assemble, initial assembly approx. 15 min
Insulation against cold & heat & noise
To be attached from the inside
store folded or rolled
7-layer insulation material, aluminum laminated with sewn-in magnets:
• Inner fabric: durable fabric
• Filling 1: aluminum thermal foil
• Filling 2: 2mm thermal foil
• Filling 3: aluminum thermal foil
• Filling 4: 2mm thermal fleece
• Filling 5: 100g/sqm polyester padding
• Outer fabric: aluminum mesh fabric silver (or black - depending on selection)
The high roof insulation consists of four parts which are attached to the lifting roof with magnets and connected to each other with Velcro. The front part can be partly rolled down for ventilation or removed completely. Since every high roof can have a certain height deviation, the thermal mats are slightly larger at the bottom and are simply folded over to prevent cold spots.
The enclosed metal pads are used to hold the thermal mats. These are glued to the aluminum rail at the top of the high roof every approx. 20 cm.
Clean the aluminum rail with isopropanol or another fat-dissolving agent. Peel off the protective film from the metal pad and attach
this at the desired location. ATTENTION: The ambient temperature as well as the temperature of the aluminum rail and the metal pads must be at least 15 °C! No damage to the roof by drilling necessary, the pads can be removed without leaving any residue.
When manufacturing the material, 7 layers of highly insulating material were quilted - made in Germany.
The thermal mats are made in Germany, custom-made products are available on request.
Our competent service team is at your side during and after the purchase with advice and assistance.
black outer fabric
8 - layer insulation material
Inner fabric: durable fabric
Filling 1: Thermo foil aluminum
Filling 2: 2mm thermal foiling
Filling 3: Thermo foil aluminum
Filling 4: 2mm thermal fleece
Filling 5: 100gr/sqm polyester padding
Filling 6: Thermo foil aluminum
Outer material: water-repellent black polyester fabric