Manufacturer: ISOCAMP®
Thermal mats - Winnebago Solis
Extreme insulation against cold but also heat - noise-reducing
Custom-made magnetic thermal mats for the pop-up roof of the Winnebago Solis
Various color combinations available:
Beige/black, beige/silver, gray/black or gray/silver
Insulation material - aluminum-coated with sewn-in magnets
Material thickness: 8mm
- Attachment using magnetic adhesive strips (40 pieces included in delivery)
- Easy to install, initial installation approx. 15 minutes
- Insulation against cold & heat & noise
- To be attached from the inside
- To be stored folded or rolled up
The high roof insulation consists of four parts, which are attached to the pop-up roof using magnets and connected with Velcro. The front part can be partially rolled down or completely removed for ventilation. Since every high roof can have a certain height deviation, the thermal mats are slightly larger at the bottom and are simply folded over to prevent cold bridges.
The enclosed metal pads serve as holders for the thermal mats. These are glued to the rail at the top of the high roof every approx. 20cm.
Clean the aluminum rail with isopropanol or another grease-dissolving agent. Remove the protective film from the metal pad and attach it to the desired location. ATTENTION: The ambient temperature and the temperature of the aluminum rail and the metal pads must be at least 15 °C! No need to damage the roof by drilling, the pads can be removed without leaving any residue.
Material and manufacture in Germany, changes and special requests are possible.
ISOCAMP - we fulfill every insulation request made to measure!
black outer fabric
8 - layer insulation material
Inner fabric: durable fabric
Filling 1: Thermo foil aluminum
Filling 2: 2mm thermal foiling
Filling 3: Thermo foil aluminum
Filling 4: 2mm thermal fleece
Filling 5: 100gr/sqm polyester padding
Filling 6: Thermo foil aluminum
Outer material: water-repellent black polyester fabric