Manufacturer: ISOCAMP®
Thermal mats for pop-up roof - Tom's Worldcruiser 1
Custom-made magnetic thermal mats for the pop-up roof of Tom's Worldcruiser 1
Extreme insulation against cold but also heat - noise-inhibiting
Different color combinations available: beige/silver, beige/black, gray/silver or gray/black
- Material thickness: 8mm
- Attachment using metal adhesive strips (65 pieces included in delivery)
- the magnets are sewn into the hem of the insulation
- Easy to assemble, initial assembly approx. 30 minutes
- Insulation against cold & heat & noise
- To be attached from the inside
- Store folded or rolled
The high roof insulation consists of three parts which are attached to the pop-up roof using magnets and connected with Velcro. The front part can be partially rolled down for ventilation or completely removed. Since every high roof can have a certain height deviation, the thermal mats are slightly larger at the bottom and are simply folded over to prevent cold bridges.
The enclosed metal pads serve to hold the thermal mats. These are glued approx. 20cm above and below in the pop-up roof.
Clean the plastic with isopropyl alcohol or another degreasing agent. Peel the protective film off the metal pad and attach
this at the desired location. ATTENTION: The ambient temperature as well as the temperature of the aluminum rail and the metal pads must be at least 15 °C
be!
No need to damage the roof by drilling, the pads can be removed without leaving any residue.
Material and production in Germany, changes and special requests are possible.
ISOCAMP - we fulfill every insulation request made to measure!
black outer fabric
8 - layer insulation material
Inner fabric: durable fabric
Filling 1: Thermo foil aluminum
Filling 2: 2mm thermal foiling
Filling 3: Thermo foil aluminum
Filling 4: 2mm thermal fleece
Filling 5: 100gr/sqm polyester padding
Filling 6: Thermo foil aluminum
Outer material: water-repellent black polyester fabric